Filter
Top Products
•
Right Front Low Pressure (with a single chime). Refer
to “Starting And Operating, Tire Section”
•
Right Rear Low Pressure (with a single chime). Refer
to “Starting And Operating, Tire Section”
•
Check TPM System (with a single chime). Refer to
“Starting And Operating, Tire Section”
Trip Functions
Press and release the MENU button until one of the Trip
Functions is displayed in the EVIC.
Use the SCROLL buttons to cycle through all the Trip
Computer functions.
The Trip Functions mode displays information on the
following:
•
Average Miles Per Gallon (MPG)
Shows the average fuel economy since the last reset.
•
Distance To Empty (DTE)
Shows the estimated distance that can be travelled with
the fuel remaining in the tank. This estimated distance is
determined using the MPG for the last few minutes. This
is not resettable.
NOTE:
The “LOW FUEL” message will appear in the
EVIC display when DTE is 30 miles or less.
•
Trip A
Shows the total distance travelled for trip A since the last
reset.
•
Trip B
Shows the total distance travelled for trip B since the last
reset.
•
Elapsed Time
Shows the total elapsed time of travel since the last reset
when the ignition switch is in the ACC position. Elapsed
time will increment when the ignition switch is in the ON
or START position.
•
Display Units of Measure in:
Press and release the FUNCTION SELECT button when
in this display until “US” or “METRIC” appears to make
your selection.
To Reset The Display
Pressing and releasing the FUNCTION SELECT button
once will clear the resettable function currently being
displayed. Reset will only occur if a resettable function is
UNDERSTANDING YOUR INSTRUMENT PANEL 143
4