D-Link DSC-2310L Automobile Electronics User Manual


 
15D-Link DCS-2310L User Manual
Section 1: Product Overview
Removing the Bottom Panel
Step 1:
Place the camera face down on a non-slip at surface.
Step 2:
Carefully pry out the two protective rubber screw coverings using a thin at blade.
Step 3:
Undo the two screws using a Philips #00 Screwdriver.
Step 4:
Lift o the protective panel.
If you need to install an SD Memory Card please skip to "Installing an SD Memory Card" on
page 16. If you need to use the Reset Button follow these steps.
Using the Reset Button
Step 1:
Follow the steps outlined in "Removing the Bottom Panel" on page 15
Step 2:
Using a paperclip or similar tool, press and hold the Reset Button for 10 seconds. This will reset
the device to it's factory settings.
Step 3:
Follow the steps outlined in "Reattaching the Bottom Panel" on page 16
2
2
3
4