Filter
Top Products
14
©
2001 Directed Electronics, Inc.
QUICK REFERENCE GUIDE:
To lock the doors using your remote
■ Pressing for one second will lock the doors. The parking lights will
flash once (if connected) to confirm the doors are locked. NOTE: Control
of power door locks is optional. Extra parts and labor may be necessary
to interface with power door locks.
To unlock the doors using your remote
■ To unlock the doors, press for one second. The parking lights will
flash twice (if connected) to confirm the doors are unlocked.
To remote start the vehicle
■ Press and on the transmitter for one second. The parking
lights will flash (if connected) to confirm remote start operation. Once
the remote start has been activated, the vehicle will run for the prepro-
grammed period or until a shutdown input is triggered.
Using Remote Start with Factory Remote Systems
■ If this remote start system has been interfaced with an original equip-
ment from manufacturer (OEM) factory remote system, the Remote
Start/Valet Take-Over sequence can be programmed to initiate with one
to three (1-3) presses of one of the OEM transmitter buttons.
OEM transmitter button used for Remote Start/Valet Take-Over
sequence______________________________________________
Number of OEM transmitter button presses required to initiate
Remote Start/Valet Take-Over sequence____________________
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
✂
✂