Filter
Top Products
21
© 2000 Directed Electronics, Inc.
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
✂✂
✂✂
QUICK REFERENCE GUIDE:
Arming
■ Press for one second. When the system arms, you will hear a short
chirp, and see the parking lights flash once. If the vehicle’s power door
locks are controlled by the system, the doors will lock.
Arming while driving
■ Press while the vehicle is running. The system will chirp once and
then once more to indicate that the ignition is on.
Disarming
■ Press . You will hear two chirps, and the parking lights will flash
twice. If power locks are controlled by the system, the doors will unlock.
Disarming without a transmitter
■ Turn on the ignition. Push the Valet switch within 15 seconds. The sys-
tem should now disarm. If it does not, you may have waited too long, so
turn the ignition off and on and try again.
Silent Mode
™
■ Press briefly before arming or disarming, and the confirmation chirp(s)
will be eliminated for that one operation only.
Panic Mode
■ Press for 1.5 seconds, and you will enter Panic Mode. The siren will
sound and the parking lights will flash for 30 seconds.
To enter or exit Valet Mode with the Valet switch
■ Turn ignition to "run" position, then turn to "off" position. Press and
release the Valet switch within 10 seconds. The Status LED will light
steady if you have entered Valet Mode, and it will go out if you exited
Valet Mode.
Using Remote Valet as you enter or exit the vehicle:
■ Open any door. Press . Press . Press again. The Status LED will
light steady if you have entered Valet Mode, and it will go out if you exit-
ed Valet Mode.