Filter
Top Products
26
©
1999 Directed Electronics, Inc.
Programming Options
Programming options control your system's normal, operational
set-up. Most options do not require additional parts, but some may
require installation labor.
The following is a list of the programmable options, with the fac-
tory settings in Bold.
■ Active arming (transmitter only) or passive arming (auto-
matic arming 30 seconds after the last door has been closed).
■ Arming/disarming siren chirps on or off.
■ The ignition controlled door lock feature on or off: When this
feature is programmed on, the doors will lock three seconds
after the ignition is turned on, and unlock when the ignition
is turned off. The system can also be programmed to prevent
the door from locking when the ignition is turned on with any
door open. If your installer is programming the system with
the DEI
®
Bitwriter or a personal computer and the TechSoft
™
Programmer, ignition lock and unlock are independent fea-
tures and can be programmed separately.
■ Passive door locking (with passive arming) or active door
locking (only when arming with the transmitter). Passive
locking allows the vehicle's doors to lock when the security
system passively arms (after the 30-second countdown). This
feature only works if passive arming has been programmed.