Directed Electronics 333 Automobile Alarm User Manual


 
20
© 2009 Directed Electronics. All rights reserved.
Responder LC Configuration
Operations of the Responder LC and how it communicates messages
are set in the configuration main menu.
Navigating Menus and Options
Navigating menus and features, changing options, and exiting are
performed using the remote control buttons. The following instructions
discuss how to access and configure the settings.
Button Operation
To s access menus, set options, and to perform actions that are
displayed in the text field, use the
button.
To s scroll the menu lists in the text field use the
AUX
or buttons.
To s exit configuration: use the
or buttons.
Access Menu Items
Press1. and hold the button for 8 seconds, the remote will beep
once,
MAIN MENU
is displayed. (If car 2 is on, ignore the car
select text and beep after 3 seconds).
Release2. the
button to display the main menu item list,
SETUP REMOTE
is displayed.
The main menu has been accessed and configuring can begin. 3.
Use the following process to view the main menu features, op-
tions and settings in the text field. The following actions are com-
monly used throughout the configuration operation.
Presss the
AUX
or buttons to change the feature or option
that is displayed in the text field.
Presss the
button to choose the feature in the text field and
view its options. Press it when the desired feature or option
is in the text field to set it as the new setting.