Filter
Top Products
[ Protection Features ]
Electronic tilt motion sensor: When arming the system, the detector
reads the position of the vehicle and won’t allow a motion of more than three
degrees. Even if it is pushed forwards or backwards, it will trigger the alarm.
Note: When arming the system, the detector requires 30 seconds to auto-calibrate. To testing should be
performed during that period of time.
Starter Kill: When arming the security system, it becomes impossible to
start the recreationnal vehicle. At the same time, the ignition is protected.
The system will detect any power in the ignition circuit and it will trigger the
alarm.
Back-up battery siren: This siren has a built-in rechargeable battery. Dis-
connecting the power or ground will trigger the siren until the internal battery
is discharged or the power is re-connected.
A push-button Valet
®
switch: This button should be hidden and it’s known
only by the owner . It has two functions. The first one allows you to disarm
the system without the transmitter should it be lost or damaged.The second
one is to change the system features or get into transmitter Learn Routine
mode.
2002 Directed Electronics, (Canada). Inc. 7