Directed Electronics 1601 Automobile Alarm User Manual


 
21
© 2008 Directed Electronics. All rights reserved.
Sensor Silent Mode
In this mode, a sensor cannot trigger the siren. All entry points (doors,
hood, etc.) will still trigger the siren.
Press the
AUX
button three times, and then press the
A U X
button.
Note:
The next time you arm the system, it will function normally.
Disarming the System
While the system is armed normally:
Press the
AUX
button once.
The siren in the vehicle will “chirp” twice, and the parking lights will
flash.
If you hear
four
chirps on disarming, the system was triggered in your
absence. Immediately look at the Status LED in the vehicle and count
the number of flashes between pauses. This number is important, it tells
what triggered your alarm. See Disarming section under Diagnostics on
page 33 for more details.
If you hear
five
chirps on disarming, the system was repeatedly trig-
gered in your absence. Immediately look at the Status LED in the vehicle
and count the number of flashes between pauses. This number is impor-
tant, it tells what triggered your alarm.
The door locks (if connected) will unlock, and the parking lights will
flash.
While the alarm is triggering:
Press the
AUX
button on the remote. The siren will stop sounding and
disarm the alarm system.