Filter
Top Products
23
© 2006 directed electronics
disarming without a transmitter
This feature allows you to disarm the security system without the
remote transmitter should it be lost, damaged, or disabled. In order
to disarm the system without a remote transmitter, you must have
the vehicle’s ignition key and know where the Valet button is
located. Be sure to check with the installer for the location and the
number of presses of the Valet button required to disarm the system.
To disarm the security system,turn the ignition to the
ON position.
Press the Valet button the preset number of times
(one to five times) within 15 seconds. After five
seconds the system will disarm. If the system does not
disarm, you may have waited too long; turn the igni-
tion off and on and try again.
Location of Valet Button_________________________________
Number of Pulses______________________________________
The 2-way remote will indicate disarm notification with 2 beeps
and 3 flashes of the Orange LED.
➜
DRW-35