Filter
Top Products
27 / 29
DENSO R5 Starter Installation Guide
Inspection After Installation
Cable Voltage Loss Test (Step 2)
1. Move Voltmeter to (-) side, as
shown.
2. Crank engine & adjust load on
Carbon Pile Loader to 500 Amps.
3. Record (-V) value indicated on
Voltmeter.
4. Add +V and -V value. Total loss
should not exceed 0.5V.
If total loss exceeds 0.5V, repair
or replace cable.
In accordance with The Maintenance
Council RP129 Section 1(B).
Diagram 2