Filter
Top Products
6. Remove front bumper styrofoam by drilling out
pop-rivets, and set aside.
One at a time replace all eight bumper bolts
with eight heavy washers, and 8mm bolts and
lockwashers.
7. Slide each pull ear pod starting from center of
bumper out and measure approximately 1-13/16”
from edge of center bumper channel to edge of
pull ear pod. Pull ears have to measure 24” center
to center. Clamp in place with “C” clamp.
1996-1999 Ford Taurus
1996-1999 Mercury Sable
2000-2003 Ford Taurus
8. Drill two 13/32” holes thru top of bumper on each
pull ear pod, using pod as template.
7. Slide each pull ear pod starting from center of
bumber out and measure approximately 1-9/16”
from edge of center bumper channel to edge of
pull ear pod. Pull ears have to measure 23-1/2”
center to center. Clamp in place with “C” clamp.
8. Drill two 13/32” holes thru top of bumper on each
pull ear pod, using pod as template.
9. Slide nut plate thru bumper hole and fasten with
3/8” x 1-1/4” bolts, and lockwashers.