Demco Actuator Automobile Parts User Manual


 
Page 11
Watch for obstructions overhead and side to side while transporting.
Always operate equipment in a position to provide maximum visibility at all times. Make
allowances for increased length and weight of equipment when making turns and/or stopping.
Good Maintenance is your responsibility. Poor maintenance is an invitation to trouble.
Make sure there is plenty of ventilation. Never operate engine of towing vehicle in
a closed building. Exhaust fumes may cause asphyxiation.
Before working on this unit, stop towing vehicle, set parking brakes, shut off engine
and remove ignition key.
Be certain all moving parts and attachments have come to a complete stop before
attempting to perform maintenance.
Always use safety supports and block wheels. Never use a jack to support unit.
Always use proper tools or equipment for job at hand.
Use extreme caution when making adjustments.
Follow torque chart in this manual when tightening bolts and nuts.
Openings in skin and minor cuts are susceptible to infection from brake fluid.
Without immediate medical treatment, serious infection and reactions can occur.
Replace all shields and guards after servicing and before moving.
After servicing, be sure all tools, parts and service equipment are removed.
Do not allow grease or oil to build up on the actuator.
When replacing bolts, refer to owners manual.
Refer to bolt torque chart for head identification marking.
Where replacement parts are necessary for periodic maintenance and servicing,
genuine factory replacement parts must be used to restore your equipment to original
specifications. Manufacturer will not claim responsibility for use of unapproved parts
or accessories and other damages as a result of their use.
If equipment has been altered in any way from original design, manufacturer does
not accept any liability for injury or warranty.
A fire extinguisher and first aid kit should be kept readily accessible while performing
maintenance on this equipment
PERFORMING MAINTENANCE