Filter
Top Products
3. Remove plastic filler panel from under facia by removing
five screws and two plastic push fasteners.
4. Remove one bolt on each side that connects facia to
fender.
5. Remove four plastic push fasteners and one screw from
filler panel on each side.
7. Remove air intake on passenger side, by removing
one bolt and two plastic push fasteners.
8. Remove plastic filler panel on each side by removing all
plastic push fasteners, set panel aside for later notching
and reinstallation.
6. If vehicle is equipped with fog lights be sure to unplug
them and remove facia.
9. Remove one bolt from horn. Bolt will not be reused.