Filter
Top Products
3. Remove one nut and one bolt from fasia to fender on
each side.
4. Remove two plastic push fasteners from back of facia
grill area.
5. Remove two plastic push fasteners from underneath
headlight (top of facia) on each side.
6. Remove two plastic push fasteners across bottom of
bumper (middle of facia).
7. Remove two plastic push fasteners from bottom of
facia.
8. Remove two plastic push fasteners from each side
underneath facia to inner wheel well extension.
9. Pull inner wheel well extension away from fender to
gain access to remove one screw, facia to fender, on
each side.
10. Carefully pull facia straight back and up in the middle
and off.