Filter
Top Products
Dakota Digital Sensor
Pack
D
akota Digital Part Number 393050
This universal
sensor kit, supplied with all Dakota Digital
sensors and
harnesses needed to complete
used adaptor bushings to
allow simpler installation into various applications.
The
oil pressure and water temp sensor provided in this kit MUST be used with your Dakota Digital display
system, using stock or
other aftermarket sensors will result in incorrect readings, gauges not working at all, or
damage to the D
akota Digital control module
speedometer
cable driven applications to convert to an electronic signal.
speed sensor
or have an ECM that provides a
wired directly to the control module.
A
accept a wide range of stock sensors as well as a custom ca
offers a universal fuel sensor,
part number
Dakota Digital provides
commonly used
the universal nature of the system
s
it may be necessary to source
additional adaptors, fittings or
Typically,
brass plumbing fittings from a hardware store
application
. The threads on the oil pressure a
other larger sized fittings.
If necessary, t
of thread sealant or tape.
The Sensor Package
includes the following parts
Ford Adaptor Cable for Speed S
ensor
(Included in certain applications
16,000 PPM Speed Sensor
with harness
1/8” NPT > 1/4”, 3/8”, and 1/2” NPT
B
0-100 PSI Solid State
Oil Pressure S
with harness
1/8” NPT > 12 and 16 mm Bushings
with crush washers
100-300˚F Isolated Water Temp S
ensor (40
with harness
Momentary Push Button Switches
Pack
age
akota Digital Part Number 393050
sensor kit, supplied with all Dakota Digital
integrated instrument
systems
harnesses needed to complete
the installation. This kit also con
tains an assortment of
allow simpler installation into various applications.
oil pressure and water temp sensor provided in this kit MUST be used with your Dakota Digital display
other aftermarket sensors will result in incorrect readings, gauges not working at all, or
akota Digital control module
. The speed sensor provided can be used for
cable driven applications to convert to an electronic signal.
If you are currently
or have an ECM that provides a
n electronic vehicle speed output
(VSS)
A
fuel level sensor is not supplied a
s the Dakota Digital control module
accept a wide range of stock sensors as well as a custom ca
libration for universal installations
part number
SEN-06-1.
commonly used
hardware to expedite the
installation of its sensor
s
and the variety of vehicles and drive
trains they are installed within,
additional adaptors, fittings or
wiring to fit the specific application
brass plumbing fittings from a hardware store
provide a simple solution to a unique mounting
. The threads on the oil pressure a
nd water temp sensor are 1/8” NPT and
If necessary, t
he threads on the sensors in
this kit may
includes the following parts
:
ensor
(Included in certain applications
)
B
ushings
Oil Pressure S
ensor
ensor (40
-150˚C)
MAN#650311
systems
includes the required
tains an assortment of
commonly
oil pressure and water temp sensor provided in this kit MUST be used with your Dakota Digital display
other aftermarket sensors will result in incorrect readings, gauges not working at all, or
. The speed sensor provided can be used for
mechanical
If you are currently
using an electronic
(VSS)
, these signals may be
s the Dakota Digital control module
can
libration for universal installations
. Dakota Digital
installation of its sensor
s, but due to
trains they are installed within,
wiring to fit the specific application
.
provide a simple solution to a unique mounting
nd water temp sensor are 1/8” NPT and
easily adaptable to
this kit may
be sealed with the use