Filter
Top Products
Diesel Engine Complete Engine
81
Hook the element and one leg of the channel (T-Bar)
into the hole as illustrated.
Hook the other leg of the channel in the hole and
push the heater into the hole as far as possible by
hand.
CAU
TIO
N
Do not pull the heater into location with the
locking bolt as the channel (T-Bar) can bend or
cause the threads to strip.
If necessary, use a plastic hammer to tap the heater
in until the shoulder contacts the block.
Tighten the locking bolt.
Torque Value: 2.0 N•m [18 in-lb]
Do not over-tighten the locking bolt.
cs900wh
cs900wi
cs900hb
cs9bona