Daewoo D30S-3(B3.3) Automobile Parts User Manual


 
Diesel Engine Specifications
119
Tap-Drill Chart - U.S. Customary and Metric
NOTE ON SELECTING TAP-DRILL SIZE: The tap drill size shown on this card give the theoretical tap drill size for
approximately 60% and 75% of full thread depth. Generally, it is recommended that drill sizes be selected in the
60% range as these sizes will provide about 90% of the potential holding power. Drill sizes in the 75% range are
recommended for shallow hole tapping (less than 1 1/2 times the hole diameter) in soft metals and mild steel.
17800013