Crowson Technology TES100SB Automobile Parts User Manual


 
Warnings:
1. Read instructions — Read all the safety and operating instructions before operating this product.
2. Heed Warnings — Adhere to all warnings on the product and in the operating instructions.
3. Servicing — Do not attempt to repair or service this product yourself. Refer all servicing to qualified service personnel.
4. Use caution when lifting heavy furniture. Serious injury may occur.
5. The TES-100 Actuator contains a powerful magnet.
6. Use caution when handling TES-100 Actuators near magnetic material (steel).
7. The TES-100 Actuator may become hot during operation.
8. Avoid contact with materials that are sensitive to heat.
9. Do not tip furniture with Actuators installed. Doing so may result in damage to Actuators.
10. Do not slide furniture with Actuators installed. Doing so may result in damage to Actuators.
11. Do not allow metal objects to touch the Actuator Binding Posts. Doing so may cause damage to the amplifier.
12. Do not expose the TES-100 Actuator to excessive amounts of moisture.
Table of Contents:
Section Page
I. Product and Performance 3
II. Installation 4 - 8
A. TES-100 Stereo Motion System 4 - 5
B. TES-100 Mono Motion System 6 - 7
C. Multiple Seat Installation 8
III. Usage and Calibration 9
A. Setting Filter Level 9
B. Setting Intensity Level 9
C. Bass Management 9
D. Stereo vs. Mono Motion 9
E. D-Box™
Motion Code™
Compatibility 9
IV. Troubleshooting 10
V. Specifications 10
VI. Warranty 11
VII. Contact information 12
Warnings / Table of Contents
TES-100 INSTALLATION MANUAL
2