Filter
Top Products
WP 2300 Series WP 2330 WP 2335 WP 2340 WP 2345
Nominal Fork Length in 36/42/48 48 36/42/48 48
11 Actual Fork Length in 35.6/41.7/47.6 45.5 35.6/41.7/47.6 45.5
12 Overall Length in 58.8/65.0/70.9 67.7 60.0/66.1/72.0 69.9
13 Wheelbase Lowered in 44.2/50.3/56.2 55.2 45.4/51.5/57.4 56.4
Raised in 39.7/45.8/51.7 52.1 40.8/46.9/52.8 53.3
14 Grade Clearance* % 52.7/44.5/38.7 31.6 50.9/43.2/37.8 30.6
Gradeability Loaded % 10 10 10 10
15 Turning Radius in 51.6/57.7/63.6 62.6 52.8/58.9/64.8 63.8
7 Truck Weight** Less Battery lb 712 712 712 712
WP 2300 Series
Specifications
1 Manufacturer Crown Equipment Corporation
2 Model WP 2330 WP 2335 WP 2340 WP 2345
3 Load Capacity lb 4500 4500 4500 4500
4 Power Electric 24 Volts 24 Volts 24 Volts 24 Volts
5 Operator Type Stand-up Walkie Walkie Walkie Walkie
8 Lift Height in 9.25 8.5 9.25 8.5
9 Lift in 6 5.2 6 5.2
Battery Compartment Length in 7.9 7.9 9.1 9.1
10 Head Length in 23.2 23.2 24.4 24.4
16 Outside Fork Spread in 21.3/26.4 21.3/26.4 21.3/26.4 21.3/26.4
17 Tiller Arm Height
in Drive Position
Min/Max in 31.1 / 47.5
18 Travel Speed Empty/Loaded mph 3.7 / 3.4
General Info
Dimensions
Forks
* Determined with forks raised
**With 48" forks
WP 2300 Series
Technical Information
Standard Equipment
1. 24-volt fused electrical system
2. MOSFET transistorized
traction control system
3. Separately excited drive motor
(SEM)
4. Electric brake
5. Brake override
6. Anti-roll down
7. Regenerative motor braking
8. Heavy-duty drive unit
9. Drive unit enclosed in high
ductile strength steel frame
10.Stamped steel power unit
cover
11.Safety reversing button
12.Roll formed forks with pull rod
height adjustment
13.175 amp connector with
quick disconnect
14.Color-coded wiring
15.Two pre-programmed
performance levels
16.10" x 4" wide rubber drive tire
17.3.25" x 4.5" wide Vulkollan
load wheels with debris guard
18.Low overall height for fork and
load visibility
19.Paper retainer on battery
cover (WP 2330 and WP 2335)
20. Horn
21. Key switch
Optional Equipment
1. Casters
2. Hour meter
3. Discharge indicator
4. Curtis Unigage includes hour
meter, discharge indicator
with interrupt
5. Handset analyzer for calibra-
tion or fault analyzing
6. 30 amp fully automatic
charger
7. 48", 60" or 72" high load
backrest
8. Maintenance free or swing-
out battery package
9. Freezer/corrosion
conditioning
10.Polyurethane drive tire
11.Non-marking rubber tire
12.Siped rubber drive tire
13.Keyless on/off toggle switch
in lieu of key switch
14.Drive/tow switch
15.Battery straps
Battery and Charger
Two battery compartments are
available to suit your duty cycle.
The 7.9" battery compartment
(WP 2330/WP 2335) is designed
for the battery package. Battery
package options are as follows:
• Maintenance-free battery
pack, four 6-volt batteries
at 195 amp hour
• Wet-cell swing-out battery
pack, four 6-volt batteries
at 160 amp hour
• Dry-cell swing-out battery
pack, four 6-volt batteries
at 160 amp hour
The optional nylon battery straps
secure the batteries to the stand
to minimize vibration in rough
floor or over dock applications,
reducing potential damage to
the batteries or the stand.
The 9.1" battery compartment
(WP 2340/WP 2345) will accept
an industrial storage battery up
to 300 amp hour capacity.
A built-in 30 amp charger is
available as an option on all
models. This premium fan
cooled solid-state charger is
durable and efficient. It has an
advanced memory feature to
allow for opportunity charging.
The charger can be set for either
maintenance-free, wet-cell or
industrial batteries. An extension
cord is included with any truck
equipped with the built-in
battery charger.
Operator Controls
The WP’s robust X10™ control
handle is designed to allow for
an optimum turning radius with
low steer effort. All control but-
tons can be operated with either
hand and can be accessed with
minimum hand and wrist move-
ment. The horn switches are
integrated in the hand grips.
An ergonomic forward/reverse
thumb wheel allows for precise
maneuvering. Depending on the
conditions, maximum travel
speed can be reduced via the
rabbit/turtle switch. The parking
brake is activated at the lower
and upper end of the tiller
position.
WP 2300 Brake Override
Function
For easy operation in tight areas
a brake override function is
incorporated which allows the
WP 2300 to be driven safely
and precisely at creep speed
with the handle in a near vertical
position. The control handle
remains within the profile of the
power unit at all times, even
when performing 90° turn.
When the forward/reverse
thumb wheel is in neutral the
parking brake is immediately
activated thus preventing
unexpected movement.