Filter
Top Products
SR 5285H Series
Technical Information
Capacity
Model SR 5285H: 4500 lb at
24" load center
Batteries/Electrical
System
The battery is pulled out of the
chassis with the reach carriage.
The battery can be removed
vertically or by rollers provided
allowing horizontal removal of
the battery from either side.
Standard Equipment
1. Crown Integrated Control
System with Access 1 2 3
®
2. Virtually maintenance free
three-phase (AC) motors
for traction, hydraulics
and steering
3. Motor controllers for trac-
tion, hydraulics and steering
4. CAN-Bus technology
5. Speed-sensitive electric
steering with programmable
turning ratios
6. Tilting steer column
7. Proportional fingertip control
for all hydraulic functions in-
corporating soft-lift/soft-stop
for smooth load movement
8. Information display:
• Access 1 2 3 on-board
diagnostics with real
time troubleshooting
capabilities
• Two-line LCD display with
16 characters per line
• Hour meters for
monitoring various truck
operating components
• Travel direction indicator
• Input for operator PIN
• Real-time clock and date
• Three selectable
performance profiles
• Battery discharge
indicator with lift lockout
• Steer wheel position
indicator
9. Integrated lift height and
load weight indicator with
truck performance linked
to fork height
10. Rack Height Select with
automatic laden/unladen
fork positioning starting
19.7" above secondary
mast staging
11. Tilt position assist
12. Free lift indicator, warning of
fork heights above free lift.
Can be programmed to
reduce top travel speed.
13. Thumb-operated travel
direction switch
14. Automotive type accelerator
and brake pedal
15. All-wheel braking
16. Braking systems:
• Parking brake
• Mechanical service brake
• Regenerative direction
reversal
• Regenerative coast
braking
17. Electric switch for parking
brake activation
18. Truck-Hold automatic
braking for slopes or
pushback racking
19. Electric power disconnect
switch
20. Vulkollan load wheels and
drive tire
21. Four easy-access storage
compartments
22. Comfortable knee and
hip padding within the
driver’s compartment
23. Comfortable suspension
seat with multiple
adjustment possibilities
24. Unique offset, wide
visibility mast
25. Clear view overhead guard
and load backrest
26. Lift slowdown prior to
reaching full mast extension
27. Reach-out battery system
28. Reach carriage slowdown
prior to reaching full extend
or retract position
29. Integrated sideshift with
tilting fork carriage
30. ISO Class 2A Forks
31. Battery plug SB 350
32. Battery rollers for horizontal
battery extraction
33. Strobe light
Optional Equipment
1. Lift cutout with/without
override switch
2. Mast mounted camera with
color or B&W monitor
3. Work lights 12-volt
4. Audible travel alarm
5. Dual-axis controls
6. Heated seat
7. Cloth seat
8. OHG covers
9. Work Assist™ Accessories
• Accessory pad clip
and hook
• Accessory clamp
• Accessory RF
mounting plate
• Accessory RF
mounting bracket
• Accessory clip pad
• Accessory hook
• Accessory pocket
• Accessory tube
10. Cold storage conditioning
for applications to -30° C
11. English/French/Spanish
labels
Driver’s Compartment
and Controls
A comfortable step height,
well-positioned grab handle and
non-slip floor mat ensure safe
and comfortable footing during
entry and exit.
Once seated, the operator has
the ability to tailor the compart-
ment to “fit”. A high quality
comfortable seat can be
adjusted for the operator’s
weight. In addition, the seat can
be adjusted laterally, as well as
for the angle of the seatpad and
backrest. These adjustments,
coupled with a tilting steer
column, ensure a comfortable
position for any operator.
The left foot rests on the
operator “presence” pedal.
The right foot operates an
automotive style accelerator and
brake pedal arrangement, while
the right leg is supported by
ergonomically positioned
padding for the knee and hip
areas. The direction switch is
actuated with the right thumb
leaving the fingers of the right
hand free to operate all the
hydraulic controls. The fingertip
control levers allow for easy
blending of hydraulic functions
and are easily understood by
new or inexperienced operators.
There are four easily accessible
storage compartments. The
ergonomically formed armrest
is well padded and is designed
particularly with wrist support
in mind.
The display contains information
on the truck’s operating status,
a battery discharge indicator, a
travel direction indicator, steer
wheel position indicator, hour
meters for various truck opera-
tions, performance profile selec-
tion, and service information
for planned maintenance sched-
uling, fault finding and testing.
Coupled with a traditional
keyswitch, the information
display also serves as the PIN
input for those choosing to
employ the on-board user code
system thereby preventing
unauthorized use. The two-line
LCD display with 16 characters
per line is well illuminated for
excellent visibility. These stan-
dard features are complimented
by information such as fork
height and load weight indicators
should these options be chosen.
A further panel is integrated into
the chassis column and incorpo-
rates optional accessories such
as light switches.
Access 1 2 3
®
Integrated Control System
Crown’s Integrated Control
System provides unmatched
truck control for all primary
truck systems:
• Traction motor control
• Hydraulic valve and
motor control
• Steer motor control
• Braking
• Information/diagnostic display
Dedicated motor controllers are
employed to simplify trouble-
shooting and minimize replace-
ment cost. All systems are linked
through CAN-Bus, which greatly
simplifies wiring while improving
diagnostic communication.
On ramps, or when interfacing
with push back racking, the
selectable Truck-Hold feature
electronically brakes the truck
when the accelerator is
released. The operator does
not have to apply the brake,
improving comfort and control
in these applications.
Selected travel speed remains
constant regardless of surfaces,
load weight or grades. The travel
speed, acceleration, and electric
braking ratio can be set via the
display, facilitating the best
possible productivity and energy
consumption for each applica-
tion. Regenerative motor braking
helps save energy.
The control system for the
hydraulic pump motor and all
proportional hydraulics facilitates
precise and sensitive execution
of all hydraulic functions. All
hydraulic parameters such as lift,
lower, tilt, sideshift and reach
speeds are fully adjustable and
can therefore be adapted to
different applications.