Filter
Top Products
RC 5500 Series
Specifications
RC 5500 Series
Technical Information
Standard Equipment
1. Crown’s Access 1 2 3
®
Comprehensive
System Control
2. e-GEN™ Braking System
with automatic parking brake
3. Intrinsic Stability System™
• Travel speed reduction and
appropriate brake control
when forks are above
free lift
• Forward tilt interlock
above staging
• Controlled tilt speeds
• Counterweight exceeds
required standards
• Cornering speed control
• Ramp hold
• Ramp speed control
4. FlexRide™ Suspension
5. Operator compartment
• Crown flexible side stance
• Padded back support with
integral side restraint
• Premium rubber floor mat
•
Padded arm rest
• Operator console with
desk top work surface
and storage
•
Entry bar
• Posture relief step
6. Multi-task control handle
7. Tilt position assist
8. Crown display
• Battery discharge indicator
with lift interrupt and
re-key feature
• Hour meters / travel
distance / stop watch
• Pin code access capable
• Event code display with five
(5) key navigation
• Access 1 2 3 diagnostics
• P1, P2, P3 Performance
tuning
9. AC traction system
10. 36-volt system
11. 350 amp battery connector
22. Audible travel alarms
23. Suspended floorboard
24. Positive/Negative
accessory cable
25. Work Assist™ Accessories
• Clip pad and hook
• Clamp
• Clamp and
mounting plate
• Operator fan
• Fire extinguisher
• Dome light
• Storage Pocket
Operator Compartment
Soft, rounded surfaces make
the compartment interior more
comfortable. Streamlined
exterior smooths entry/exit
for the operator.
A low floor height, (9.5") first
greets the operator. A patented
FlexRide suspended floor
provides a comfortable ride
for a wide range of operators.
A footrest provides postural
relief during stationary tasks,
complementing the largest
floorboard in its class.
Crown’s flexible side stance
allows the operator to change
positions to increase comfort
and productivity.
An entry bar with sensors auto-
matically slows travel and sounds
an audible alarm when activated,
encouraging safe foot positioning
inside the truck.
The Multi-Task Control Handle
naturally bridges Crown’s
current and past designs.
Intuitive operation is increased,
reducing the learning curve.
Blending of hydraulic control
functions and traction can
improve productivity. Control
handle activation forces are
reduced. Soft grip steer tiller
with hydrostatic steering reduces
operator fatigue.
12. InfoPoint
®
System with
Quick Reference Guide
13. Color-coded wiring
14. Battery rollers
15. Dual 10" cushion steer tires
16. Large 16" cushion drive tires
17. Crown-manufactured drive
and lift motors
18. High visibility power unit
19. Radial design overhead guard
with third post
20. High visibility mast with
in-line hose routing
21. Hydrostatic power steering
22. 5° forward tilt
23. 48" high load backrest
24. Reverse steering
Optional Equipment
1.
AC Hydraulics
2.
Productivity package
3. Operator compartment
wall padding
4. Adjustable armrest
5. Freezer and corrosion
conditioning
6. Sideshifter
7. Hydraulic valves for
attachments
8. Quick disconnect
hydraulic connectors
9. Forward steering
10. EE rating
11. InfoLink™ Ready System
12. Keyless on/off switch
13. Fork lengths
14. Polished and tapered forks
15. Load backrest heights
16. Non-marking smooth or lug
rubber tires
17. Drive-in rack overhead guard
18. Overhead guard heights
19. Tilt options
20. Work lights
21. Strobe lights
Operator visibility is
improved with:
• Low-profile sculpted
power unit
• High visibility mast
• Angled overhead guard post
and placement
• Radial design overhead guard
• Flexible side stance
Crown Drive System
Crown has applied the latest
generation AC drive system,
enhanced with Access 1 2 3
technology. The demand for
high efficiency systems that
closely match customer torque
requirements is met with this
generation control system.
Crown-manufactured, indepen-
dently controlled, AC drive
motors are specifically designed
to optimize system integration
between the traction and
braking controls.
Crown’s Access 1 2 3
technology provides optimum
performance and control by
offering a communication
interface for operators and
technicians, intelligent
coordination of lift truck
system and simplified service
with advanced diagnostics.
The Crown display is used for
easy troubleshooting, access
service history and set perfor-
mance features. A distribution
panel is conveniently located
with all test points, control
fuses and central wiring for
easy troubleshooting.
Three modes of performance
can be selected to accommo-
date operator experience or
application requirements.
Mast Type TT QUAD
9 Lifting Height in 154 190 208 226 244 240 246 258 264 276
11 Free Lift Height in 20.2 32.2 38.2 44.2 50.2 33.2 36.2 39.2 42.2 45.2
14 Tilt B/F* degree 3/5 5/5 5/5 5/5 5/5 3/5 3/5 3/5 3/5 3/5
17 Mast Collapsed Height in 71.3 83.3 89.3 95.3 101.3 83.4 86.4 89.4 92.4 95.4
18 Mast Extended Height in 202 238 256 274 292 288 294 306 312 324
All values with 48" Load Backrest
*Forward Tilt limited to 2º above staging