Crown Equipment PTH 50 Series Automobile User Manual


  Open as PDF
of 3
 
2.95"
o
⁄ 2.95" x 4"
14"
14" + A
o
⁄ 7" x 2"
47"
C
6.3"
PTH–16 15.8"
PTH–18 17.7"
PTH–20 20.5"
PTH–27 27"
7.95"
5"
B
A
Specifications
(A) (B) Load (C) Load
Model Width Fork Wheel Wheel
Weight
Length Lowered Raised
(lb)
PTH 50 16-36 15.8" 36" 29.5" 23.5" 132
PTH 50 18-42 17.7 42 35.5 29.5 141
PTH 50 18-48 17.7 48 41.5 35.5 148
PTH 50 20-36 20.5 36 29.5 23.5 137
PTH 50 20-42 20.5 42 35.5 29.5 143
PTH 50 20-48 20.5 48 41.5 35.5 150
PTH 50 27-36 27.0 36 29.5 23.5 143
PTH 50 27-42 27.0 42 35.5 29.5 150
PTH 50 27-48 27.0 48 41.5 35.5 159
PTH 50 27-54 27.0 54 47.5 41.5 174
PTH 50 27-60 27.0 60 53.5 47.5 187
PTH 50 27-72 27.0 72 65.5 59.5 209
Capacity 5000 lb
Width of each fork 6.3"
Lift 5"
Polyurethane wheels
Steer wheels Ø 7" x 2" wide
Load wheels Ø 2.95" x 4" wide
Crown Equipment Corporation
New Bremen, Ohio 45869 USA
Tel 419-629-2311
Fax 419-629-3796
crown.com
Because Crown is continually improving its products,
specifications are subject to change without notice.
Crown, the Crown logo, the color beige, the Momentum
Mark and Crown Integrity Parts are trademarks of Crown
Equipment Corporation.
Copyright 2007 Crown Equipment Corporation
SF14847 10/07
Printed in U.S.A.
You can count on Crown to build lift trucks
designed for safe operation, but that’s
only part of the safety equation. Crown
encourages safe operating practices through
ongoing operator training, safety-focused
supervision, maintenance and a safe
working environment. Go to crown.com and
view our safety section to learn more.
Load Backrest
Constructed of 5/16" steel,
backrests are available in 48"
and 60" sizes. Bolt-on installation
simplifies field retrofits.
Options
Skid Adapter
Increases lowered height to 5.5"
to permit skid handling. Raised
height increases to 10.5". Adapter
latches in vertical position for
pallet-handling tasks.
 previous