Filter
Top Products
Specifications
PE 4000 Series
PE 4000 Series Standard-Tip Forks Extended-Tip Forks
Nominal Fork Length in 36 42 48 54 60 96 84 93 96
11 Actual Fork Length in 35.75 41.75 47.75 53.75 59.75 95.75 83.75 93 95.75
12 Overall Length Option 1 in 72.44 78.44 84.44 90.44 96.44 132.44 120.44 129.69 132.44
Option 2 in 78.94 84.94 90.94 96.94 102.94 138.94 126.94 136.19 138.94
13 Wheelbase Option 1 in 43.12 49.12 55.12 61.12 67.12 103.12 75.12 75.12 75.12
Option 2 in 49.62 55.62 61.62 67.62 73.62 109.62 81.62 81.62 81.62
14 Grade Clearance Option 1 % 44 38 34 30 27 18 24 24 24
Option 2 % 38 33 30 27 25 17 22 22 22
15 Turning Radius Option 1 in 60.95 66.93 72.90 78.88 84.88 120.8 92.9 92.9 92.9
Option 2 in 67.43 73.40 79.38 85.38 91.38 127.3 99.3 99.3 99.3
7 Truck Weight 6000 lb lb 1496 1512 1528 1544 1560 1710 1643 1724 1739
8000 lb lb 1515 1539 1563 1587 1611 1775 1703 1784 1799
1 Manufacturer Crown Equipment Corporation
2 Model PE 4000
3 Load Capacity lb 6000/8000
4 Power Electric 24 Volts
5 Operator Type Stand-up Walk/Ride
8 Lift Height in 9.25
9 Lift in 6
10 Head Length Option 1/Option 2 in 36.7/43.2
16 Outside Fork Spread Standard Tip in 22/27
Extended Tip in 23/28
17 Speed Travel Power Unit First Forks First
Empty mph 8.6 5.5
4000 lb mph 7.0 5.2
6000 lb mph 6.3 5.1
8000 lb mph 6.0 5.0
General Info
Dimensions
Performance
Forks
Model PE 4000-60 PE 4000-80
Drive Tire in 13 x 4.5 x 8 Poly 13 x 4.5 x 8 Poly
Casters in 2 - 4 x 2.5 Poly 2 - 4 x 2.5 Poly
Load Wheels 2 - 3.25 x 6.5 (-35) 2 - 3.25 x 6.5 (-35)
-10 Low rolling resistance, cut/tear resistance. Docks, rough floors, floor debris and traction.
-30 Moderate cut/tear resistance, high capacity. High capacity transport. Not for dock use.
-35
Highest cut/tear resistance offered. Extremely high capacity, low rolling resistance. Docks, rough floors and floor debris.
-40 Combines good cut/tear resistance and very high capacity. Use where nothing else works.
Wheels and Tires