Filter
Top Products
22
TRANSMITTER PROGRAMMING
Transmitter Programming: (Excludes RS-1300DP model without remotes)
Notes: Remote Transmitters/Transceivers come pre-programmed from the Factory. When re-learning remotes or adding
remotes, ALL your system’s remote codes must be learned at time of programming!! These systems allow storage of up
to 4 different remote codes in memory. The RS-1604TW1/1704TW2/1804FM systems include both a 1-way remote
transmitter and an LED or LCD remote. The “Sidekick” transmitters for the TW1/TW2 systems are a special model that is
not compatible with standard RS-1301/3/4DP remotes. RS-1301/3/4DP and RS-1604TW1/1704TW2/1804FM remotes are
not interchangeable.
1. Open hood (ground the Gray hood pin wire if no hood pin is installed.)
2. Turn key to the ON position. (Do not start vehicle) Pink wire must be connected!
3. Press Program/Valet button 4 times. Wait for the unit to flash the parking lights and/or honk horn exactly 4 times.
4. RS1300 series: Press Button #1 (Lock) of the transmitter to be learned. RS1604TW1/1704TW2/1804FM: Both the
Lock & Unlock buttons must be pressed. You should get 2 light flashes and 2 horn honks indicating the code-learn.
Now the unit is waiting for a 2
nd
code, so repeat this step as needed with up to 3 additional remotes. The unit will flash
the lights in succession after each code learned for up to 4 codes. (3 flashes for the 2
nd
code, 4 flashes for the 3
rd
code
and 0 for 4
th
code.) If all 4 codes are learned, the unit will automatically exit code learning mode, otherwise turn key
OFF and close the hood.
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
FLASH 2, 3, or 4 X's
(GRAY WIRE GROUNDED)
RS-1604TW1/1704TW2
RS-1300 Series
IGN
OFF
PRESS TOGETHER
LOCK &
UNLOCK
PRESS
LOCK ONLY
(2-Way systems only)
COMPLETE