Filter
Top Products
TRANSMITTER PROGRAMMING
1. Turn Ignition ON and OFF 3 times quickly, leaving it ON the 3
rd
time. (ON/OFF, ON/OFF, ON) You should
hear (3) chirps.
2. Press the Program/Override Button 5 times and you should hear 5 light flashes and 5 siren chirps.
3. Press #1 (LOCK) on the new transmitter. Siren chirps one time for Code-learn confirmation. Press #1
Button on a second or third remote at this time. (If needed)
4. Turn off Ignition. Siren will chirp 3 times and lights will flash 3 times for exit confirmation
Note 1: This system will learn a total of 4 transmitters max.
Note 2: If you are using this identical alarm system in two vehicles, you can program button 4 (PANIC) from
the other vehicle’s remote to Arm/Disarm THIS alarm system. Follow steps above, but press the other
vehicle’s remote Button #4 (PANIC) in step 3. The other vehicle’s remote transmitter will only ARM/DISARM
with Button 4 and not perform any auxiliary or special features on THIS system.
DIAGRAM:
IGN
OFF
PAN IC
TURN IGN. ON
3 TIMES:
ON, OFF
ON, OFF
ON.
5 CHIRPS
PRESS
BUTTON
5 TIMES
PRESS LOCK
BUTTON
1 CHIRP
5 FLASHES
(CODE LEARNED)
IGN
OFF
PRESS LOCK
ON ANOTHER
REMOTE
OR
3 CHIRPS