Filter
Top Products
Crestron MMK-CBF-T Mud Ring Mount Kit for Cameo
™
2
Installation Guide – DOC. 6637A Mud Ring Mount Kit for Cameo™2: MMK-CBF-T • 3
Installation
It is assumed that the keypad has been assembled and that the template
supplied with the keypad has been used to prepare a hole in the wall
according to the procedures in the latest version of the C2N-CBF-T
Operations and Installation Guide (Doc. 6603), available from the
Crestron website (http://www.crestron.com/manuals
). It is also assumed
that the drywall in place has an irregular rectangular cutout that requires
the use of the mud ring mount kit.
The only tools or materials required and not supplied are:
• Level
• Hand saw suitable for cutting a hole in the drywall
• Four standard drywall screws
• #2 Phillips screwdriver
• Tools/material to apply drywall joint compound
The following figure (not to scale) illustrates the supplied template used to
prepare the hole in the wall or other mounting surface for the metal mud
ring plate (mud ring).
NOTE: Use only the original template, not a photocopy, to prepare the
hole. Photocopies usually alter the size of the image slightly, which would
make the hole the wrong size.