Filter
Top Products
TABLE OF CONTENTS
Warranty .....P. 2
Save these instructions .....P. 2
Safety instructions .....P. 3
Assembly .....P. 4
Operation .....P. 4 , P. 5 & P. 6
Maintenance .....P. 6 & P. 7
Storage .....P. 7
Troubleshooting .....P. 8
Parts .....P. 8
Service .....Back cover
WARRANTY
CRAFTSMAN ONE YEAR FULL WARRANTYRAFTSMAN ONE YEAR FULL
If this Craftsman product fails due to a defect in material or workmanship within one year from
the date of purchase, return it to any Sears store or other Craftsman outlet in the United
States for free replacement.
This warranty applies for only 90 days from the date of purchase if this product is ever used
for commercial or rental purposes.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
SAVE THESE INSTRUCTIONS
Save these instructions. For your safety, read, understand, and follow the information
provided with and on this jack.
• The owner and operator of this equipment shall have an understanding of this jack and safe
operating procedures before attempting to use. The owner and operator shall be aware
that use and repair of this product may require special skills and knowledge.
• Instructions and safety information shall be conveyed in the operator's native language
before use of this jack is authorized. If any doubt exists as to the safe and proper use of this
jack, remove from service immediately.
• Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including
labels) are noted. Any jack that appears damaged in any way, operates abnormally or is
missing parts, shall be removed from service immediately. If the jack has been or suspected
to have been subjected to a shock load (a load dropped suddenly, unexpectedly upon it),
immediately discontinue use until jack has been checked by a Sears service center.
• It is recommended that an annual inspection be done by qualified personnel. Labels and
Operators Manuals are available from manufacturer (see Parts, page 8).
PRODUCT DESCRIPTION
Craftsman Hydraulic Bottle Jacks are designed to lift, but not sustain, loads ranging from 2
tons thru 6 tons depending on the rated capacity of the jack. They are designed to be used
vertically. After lifting, loads must be immediately supported by appropriate means. Each
model is suitable for use in an appropriately rated and designed vertical or bench press
structure. These jacks are not appropriate to use for lifting or positioning construction trailers,
houses and/or other building structures.
2