CompuSTAR 2WSHLCDR-703 Automobile Alarm User Manual


 
9 By Firstech, LLC By Firstech, LLC 8
Quick Reference
R@w@r@b@f
Button Duration Additional Programming Function / Description
Required
0.5 seconds no
no
Activates passive arming (vehicle will arm/lock 30 seconds after the vehicle is disarmed)
2.5 seconds no
Accesses remote option programming
(clock, reservation time start, vibrate mode, and RPS on/off)
0.5 seconds yes
Activates timer start mode. Timer start mode has multiple programmable settings:
duration settings, temperature settings and self start settings.
0.5 seconds yes Activates Turbo timer mode.
2.5 seconds yes
Activates the 2nd Car function
II + III
II + IV
III + IV
0.5 seconds yes Drive lock. Activates ignition controlled door locks
2.5 seconds
Option programming menu 2. For use during installation
I + IV
Quick Reference
Q@w@r@b@f
Button Duration AdditionalProgramming Function / Description
Required
0.5 seconds no Locks doors and / or arms alarm.
3.5 seconds no Panic/vehicle locater (flashes vehicle’s parking lights and sounds siren and horn)
0.5 seconds no Unlocks doors and / or disarms alarm.
0.5 seconds no Aux 1. Triggers the auxiliary 1 output (most commonly used for rear defrost or window roll-down)
2.5 seconds no Trunk release. Triggers the trunk release output and opens the vehicle’s trunk.
0.5 seconds no Aux 2. Triggers the auxiliary 2 output (most commonly used for rear defrost or window roll-down)
2.5 seconds no Activates the remote start. Repeat and remote start will shut off
0.5 seconds no Turns siren on/off (Note: With the siren off, it will still sound in the event the alarm is triggered)
2.5 seconds no Option programming menu 1 - Installers Only
0.5 seconds no Valet mode (see Valet Mode section for details)
2.5 seconds no Turns the shock sensor on/off. (Alarm or alarm / Starter systems only)