Filter
Top Products
6
System Maintenance
Programming Keyless Entry Characteristics
1. Press and hold the brake pedal. Turn the ignition on and off four (4) times, then
release the brake pedal.
If done correctly, the unit will respond by flashing the parking lights four (4) times.
(From inside the vehicle, you will hear four (4) ‘clicks’ from the module.) This
indicates that the unit has entered the programming mode.
2. Press the LOCK button (button 1) on a programmed
transmitter to begin option selections. The
vehicle parking lights will flash a number of
times to indicate the number of the option.
The vehicle door locks indicate whether
an option is on or off.
• If the selected option is ON, the
doors will lock.
• If the selected option is OFF, the
doors will unlock.
• Doors will lock or unlock when an option is changed.
3. Press and release the brake pedal to exit the programming mode.
Option Number and Description Bold Type
Indicates Factory Settings
Locked Unlocked
1 Doors lock when all doors are closed and ignition is turned on YES NO
2 Doors unlock when ignition is turned off YES NO
3 Courtesy light turns on when ignition is turned off YES NO
4 Door lock / unlock output duration is (1)
1
/
2
second or (2) 5 seconds (2) (1)
5 Courtesy light stays on 1 minute after exiting vehicle YES NO
Door Locks
Button 2
Press to
Turn Option
ON or OFF
Button 1
Press to
Advance to
Next Option
Press BOTH
Buttons (1 and 2)
to Reset all Options
to Factory Settings