Filter
Top Products
12 ca5550SST rev B. 2011 Audiovox Electronics Corporation. All rights reserved.
Replacing Remote Control Batteries
1 Way Remote Control
The battery (model CR2032) inside each remote control should last approximately 1
year under normal use. When the batteries become weak you will notice the
remote control range (the distance from the vehicle the remote control will work)
deteriorate and the small LED on the remote control will dim. To replace the remote
control batteries:
1. Remove 3 screws and disassemble the halves of the remote
control.
2. Remove the old battery, observing the +/- symbols on the
battery and replace with a new CR2032 battery.
3. Reassemble the halves of the remote control and install the 3
screws.
4. Test operation of the remote control.
2 Way LCD Remote Control
The battery inside the 2 way LCD remote control is rechargeable, use the
supplied battery charger to charge the battery until the battery icon on the
LCD screen shows 3 bars indicating charging is complete. It is
recommended that the battery be fully charged before normal use.