Filter
Top Products
112010 Audiovox Electronics Corporation. All rights reserved.
Replacing Remote Control Batteries
1 Way 4 Button Remote Control
The batteries (model CR2016) inside each remote control should last
approximately 1 year under normal use. When the batteries become
weak you will notice the remote control range (the distance from the
vehicle the remote control will work) deteriorate and the small LED on the
remote control will dim. To replace the remote control batteries:
1. Remove 3 screws and disassemble the halves of the remote
control.
2. Remove the old batteries, observing the +/- symbols on the
batteries and replace with new CR2016 batteries.
3. Reassemble the halves of the remote control and install the 3
screws.
4. Test operation of the remote control.
2 Way LCD Remote Control
The CR2450 battery inside the 2-way LCD remote control should last
approximately 6 months under normal use. When the batteries become
weak you will notice the remote control range (the distance from the
vehicle the remote control will work) deteriorate and the BATTERY icon on
the LCD remote control will show.
1. Gently slide the battery cover off of the remote control.
2. Remove the old CR2450 battery, observing the +/- symbols on
the battery, and replace with a new CR2450 battery.
3. Gently slide the battery cover on to the back of the remote
control.
4. Test operation of the remote control.