Filter
Top Products
,
"
, '
SYSTEM
MAINTENANCE/SERVICE
The
system requires
no
specific maintenance, YourCode-Alarmdealeris fully
qualified
to properly seNice all
system
components should a problem
arise.
The
life
expectancy
of
the transmitter battery
is
approximately 1 year
may
be
longer depending on actual
use.
Decreasing transmitter range i
an indication
of
a weakening battery.
To
access the transmitter battery;
1
.
Use
a small phillips
head
screwdriver
to
remove the case screVf on the
back
of
the transmitter.
2.
Remove the
back
cover
to
access the battery.
3,
Carefully remove the battery
and
replace
It
with a
12V
cigarette lighter
battery (Duracell-Type
MN21, Gold Peak-Type GP23A or order from your
dealer). Make
sure
the battery's (-) &
(+)
sides
are
placed
into transmitter
properly.
During ideal conditions your
CODE
ALARM
security system
is
designed
to
operate
via remote control
at
a range
of
approximately
50
feet from your
vehicle. Although you
may
at
times experience range greater than
50
feet,
are certain conditions
that
will cause the transmitter range
to
be
less
what
you would normally experience, Atmospheric conditions
and
radio interference are just a
few
examples
of
the types
of
interference
that
can
reduce transmitter range,
If
you experience conditions which will
not
allow your transmitter
to
disarm your vehicie, then
use
your emergency
override button inside the
vehicle.
This
will disarm
the
system
and
allow you
start your
vehicle. Move your vehicie to a different location,
If
problem
occurring,
check
your transmitter battery or see your dealer,