Filter
Top Products
,
Turn
the ignition key
off
and
exit the vehicle.
Press
the arming button (refer
to
multi-
car
operation
to
determine
button
function) on the remote control transmitter.
The
siren
will emit 2 short arm
"chirps"
to
indicate
that
the system
is
fully armed. A single
shOrt
"chirp" in-
Idic:at,.sthat one
of
the
protected
entry points has been·)eft open.
The
siren
will emit the 2nd arm "chirp" 1 second after the entry point
is
closed.
U,&!m;;H'IJl.u!~A!&r!!'l!l~z;'
Turn
off
the ignition key
and
exit the vehicle.
1 minute after exiting the vehicle
the
siren
will emit 2 short arm "chirps"
to
indicate
that
the system
is
fully armed. A single short 'chirp" indicates
that
one
of
the
protected
entry paints has been left open.
The
siren will
emitthe
2nd arm "chirp' 1 second after the entry paint
is
closed. "
DISARMING
THE
SYSTEM
~With
the system armed,
press
the
disarm
button on the remote control transmitter.
The
siren
will emit one long "chirp"
(about
twice
the duration
of
the arm "chirps")
to
indicate
that
the system
is
fully disarmed.
The
dash mount status light will turn off.
The
Jvehicle
can
now
be
started normally.
l!IEMERGENCY
OVERRIDE
BUTTON:
In
the event
of
a lost transmitter, enter the
vehicle, turn on the ignition switch, then
press
the
hidden
disarm
button
to
disarm the
vehicle.
,
Automatic
arming
systems
will auto-
matically re-arm 1 minute after disarm.
The
ignition or valet override switch must
be
turned on within 1 minute to prevent auto-
matic
re-arm.
ARM/
nr::::l
DISARMUL:J