Filter
Top Products
Program/Mute Button
Select/Dim Button
Set/City
Button
Nothing Comes Close to a Cobra
®
19
Settings
Your Detector
18
English
Settings
Your Detector
NOTE
If you do not press the Set/City button within two minutes after beginning
the set compass process, compass calibration will automatically terminate.
To Calibrate the Compass Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode, go to
Set Compass.
Tone
Visual Display Voice
None Set Compass None
Press and release the Set/City button
to begin setting the compass.
One (1) beep Drive in 2
circles…
Press SET
when done…
Set Compass
Within two minutes, drive your
vehicle in a circle twice, then press
the Set/City button again.
Three beeps Compass Set!
For two
seconds
followed by
direction of
travel (N, NE,
E, SE, S, SW,
W or NW)
Compass Set
Press and release either the Select/Dim
button to proceed to the next user mode
or the Program/Mute button
to exit Program mode.
None None None
Set Compass
Set Compa...
Calibrate
Compass
Drive in...
Compass Set
Compass
Press SET... Set!
Direction
of Travel
N W h
Tone Visual Display Voice
One beep Compass not set…
Please try again…
Compass not set…
Please try again…
Compass n...
Please tr...
Terminate
Compass
Your detector includes an internal
8-point Compass that will continuously
display your current direction of travel:
N, NE, E, SE, S, SW, W or NW.
Calibrating the Compass
NOTE
Before using it for the first time, you must calibrate the compass to provide
accurate indications of direction. See page 7 for instructions
on using the Program mode to select Set Compass.
Calibration allows the compass electronics to measure and store information
about the magnetic fields generated by your vehicle.
The compass will remain accurately calibrated as long as your detector is mounted
in the same place in your vehicle. If you change the location where the unit is
mounted or move it to another vehicle, you must recalibrate the compass.
The compass temporarily may not provide accurate readings if you are inside a
building or enclosure, or are close to a large metal tractor/trailer, truck, or train.
Once you are away from such a location, the compass will work correctly again.
NOTE
When the instructions direct you to drive in two circles, a large parking lot is
the most convenient place to do so. It does not matter what direction your
vehicle is pointing when you start the circles, which direction you go to make
the circles, and it does not have to be exactly two circles. You do NOT have to
make perfect circles. You can drive in any pattern, as long as you make two
complete turns. Four three-point turns, two small squares, or any two
complete loops will work as well as two circles. It does not matter what size
the circles are, if your speed is constant, or how fast you make the circles
[but less than two minutes]. Please be careful when making the circles and
watch for other traffic.
8-Point
Compass
N
S
W
NW
SW
E
NE
SE
XRS970_MANL:9496_XRS9730 12/18/09 8:31 AM Page 18