Filter
Top Products
Getting Started And Settings
Getting Started
•
Y
our Detector
Nothing comes close to a Cobra
®
5
Installation
Y
our Detector
4
English
1. Place the detector on the dashboard to find a location
where the unit has a clear, level view of the road.
The angle can NOT be adjusted after mounting.
2. Remove the paper backing
from one (1) side of the
hook-and-loop fastener.
3. Attach the pad to the
dashboard at your chosen
location and remove the
other paper backing.
4. Attach the detector to the
hook-and-loop fastener.
You can remove and
reattach the unit as
often as you like.
6. Plug the power cord
into the detector.
7. Plug the cigarette lighter
adapter on the power
cord into your vehicle’s
cigarette lighter.
Dashboard Mounting
System Ready
Power On
Testing
Voice Alert
On-Off/
Volume Control
Rotate clockwise
(away from you)
NOTE
In some vehicles, power is supplied to the cigarette lighter
even while the ignition is Off. If this is the case with your
vehicle, you should turn Off or unplug your detector when
parking for lengthy periods.
Secondary Icons
To Turn On The Unit And Adjust The Audio Volume
Rotate the On-Off/
Volume control
clockwise (away
from you).
Tone Voice
Visual Display
Three (3) beeps Testing, then
three (3) beeps
System Ready, then
Voice Alert
The display will
cycle through the
user mode settings
(Voice Alert,
Spectre 1 and VG-2,
IntelliMute, City X
or Highway status).
Start-up is complete when the display continuously
shows the letters indicating the current user settings
(c = City mode, h = Highway mode, i = IntelliMute On)
Start-Up Complete
h
Settings
•
When changing the Settings on your detector, please keep in mind:
■
Buttons can have multiple functions.
■
Depending on your choice of Voice Alert or Tone Alert mode, you will
hear either voice messages or tones confirming changes in settings.
■
All settings will be stored in memory when the power is
turned
Off and recalled when the power is turned back On.