Filter
Top Products
Controls and Indicators : About the NAV ONE System
2
Power Button
S Press to turn the unit On. Press and hold to turn it Off.
S Hold for ten seconds to reset the unit if necessary.
S When unit is On, tap to cycle through four levels of brightness.
S SmartPower default is Off. See NOTE below.
Microphone
Menu Button
S Press to go directly to the Main Menu. (While entering data or changing
preferences, a confirmation message will appear with the choice to
save changes or not before proceeding to the Main Menu).
Illuminated Touch Screen
S Touch the on-screen buttons and icons to activate unit functions.
S Main Menu is shown here.
NOTE
With SmartPower On, the system is shut down when there is a
combination of no vehicle motion and no button press for 15 minutes.
When SmartPower is Off, the system continues to operate until
it is turned Off with the Power button (or ignition).
Bracket Mounting Lock
Speaker
SD Memory Card Expansion Slot
External GPS Antenna Connector
USB Connector for Data and Software updates
and for Optional Traffic Data Receiver
12V Power Connector
External Speaker Connector
External Microphone Connector
Connector for Optional Traffic Data Receiver
10474 NAVONE 5000 VD_PH1.2.qxd 7/25/07 2:39 PM Page 2