Filter
Top Products
Settings
Y
our Detector
Nothing comes close to a Cobra
®
7
Settings
Y
our Detector
6
English
Settings
•
When changing the Settings on your detector, please keep in mind:
■
All settings will be stored in memory when the power is
turned
Off and recalled when the power is turned back On.
Highway/City Mode
Setting your detector to City mode delays all X band audio alerts at lower
signal strength levels. (A single beep will sound when the signal is first
detected.) This will reduce false alerts while you are driving in, or near,
urban areas where there are many sources for conflicting X band signals
such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates
what you will see and hear as you complete each step. The factory setting
is
Highway mode.
City Button
Press and release
City Mode
Highway Mode
To Change From Highway Mode To City Mode
Press and release
the City button.
Tone
Visual Display
One (1) beep
Cty
appears in the display
To Change From City Mode Back To Highway Mode
Press and release
the City button again.
Tone
Visual Display
Two (2) beeps
Cty
off
•
X
K
⁄
Ka
L
V
⁄
S Cty
•
X
K
⁄
Ka
L
V
⁄
S
Cty
Muting An Alert
Your detector allows you to quickly turn Off an audio Alert by momentarily
pressing the
Mute button. If you press the Mute button a second time
during the
Alert, the audio Alert will be turned back On.
Auto Mute Mode
Auto Mute will automatically reduce the audio volume of all alerts
after four (4) seconds for as long as the signal is detected. The factory
setting for
Auto Mute is On.
Mute Button
Press and release
To Turn Auto Mute Off
Press and release
the Mute button
while no alert
is occurring.
Tone
Visual Display
One (1) beep None
To Turn Auto Mute On
Press and release
the Mute button
again while no
alert is occurring.
Tone
Visual Display
Two (2) beeps None