Filter
Top Products
3
OPERATION•SETTINGS
3
OPERATION•SETTINGS
7
6
X K Ka V S
X K Ka V S
City mode Highway
mode
When changing the settings on your
ESD-9110, please keep in mind:
• Buttons can have multiple functions.
• All settings will be stored in memory
when the power is turned off and recalled
when the power is turned back on.
Highway/City Mode
Setting your ESD-9110 to City mode delays
all X band audio alerts until the signal
strength reaches level 3. (A single beep will
sound when the signal is first detected.)
This will reduce false alerts while you are
driving in or near urban areas where there
are many sources for conflicting X band
signals such as microwave towers and
automatic door openers.
To change settings, follow the procedure in
the table below, which indicates what you will
see and hear as you complete each step.
The factory setting is Highway mode.
UltraBright™ Data
Display Brightness
You can choose from three settings for
brightness of the display.
You can cycle through the settings
by repeatedly pushing the DIM button
The factory setting is Bright.
CITY button
Press and release
To change from
Highway mode
to City mode
To change from
City mode back
to Highway
mode
Procedure
Press and
release the
CITY button.
Press and
release the
CITY button
again.
Tone
1 beep
2 beeps
Visual Display
appears in
the display
appears in
the display
DIM button
Press and release
D
I
M
B
U
T
T
O
N
P
R
E
S
S
A
N
D
R
E
L
E
A
S
E
D
I
M
B
U
T
T
O
N
P
R
E
S
S
A
N
D
R
E
L
E
A
S
E
D
I
M
B
U
T
T
O
N
P
R
E
S
S
A
N
D
R
E
L
E
A
S
E
Dark
Bright
Dim
To change
the brightness
to Dim
To change
the brightness
to Bright
To change
the brightness
to Dark
Procedure
Press and release
the DIM button
once.
Press and release
the DIM button
again.
Press and release
the DIM button
a third time.
Tone
1 beep
1 beep
2 beeps
Visual Display
Display dims
Display remains
dim (No visual
alerts will be seen)
Display returns
to full brightness