Filter
Top Products
Quick Start
5
Turn On and Adjust Volume
Turn On and
Adjust Volume
Installation
4
Note
It will be easy for you to
remove and reinstall your
Cobra ESD-9100 detector at
any time using this hook
and loop material on the
dashboard.
Remember: Without the
means to adjust the angle
of the detector (when
mounted as above),be
sure you that your Cobra
ESD-9100 has a level,clear
view of the road before you
attach the hook and loop
material.
Dash Mounting
Dash
Mounting
Plug power cord
into detector.
Plug power cord
i n to cigare t te lighte r.
Peel protective
paper off one side
of hook and loop
material.
Place on dash.
Peel top paper off. Place detector on
hook and loop pad.
1 2
3 4
5 6
Rotate ON-OFF Volume Control to left (away
from you). An audible “tone”will indicate the
unit is on. PWR LED on front of unit
is illuminated.
1
9100.MANUAL 8/9/00 12:12 PM Page 4