Filter
Top Products
Feature
Factory
setting
# of
momentary
presses
Secondary
action
Program
completion
confirmation
Result
Add a new
remote to
channel 2
(remote
accessory)
—
14
Press remote control button 2 2 chirps
Button 2/channel 2 code
of the new remote control
has been memorized
Add a new
remote to
channel 3
(silent
arm/disarm)
—
15
Press remote control button 3 3 chirps
Button 3/channel 3 code of
the new remote control
has been memorized
Add a new
remote to
channel 4
(optional
remote
accessory)
—
16
Press remote control button 4 4 chirps
Button 4/channel 4 code
of the new remote control
has been memorized
Add a new
remote to
channel 5
(remote
valet mode)
—
17
Press the side LevelShift
button once, then press
button 1
5 chirps
Button 1/channel 5 code
of the new remote control
has been memorized
Add a new
remote to
channel 6
(remote
headlights)
—
18
Press the side LevelShift
button once, then press
button 2
6 chirps
Button 2/channel 6 code
of the new remote control
has been memorized
Erase all
channels
—
19
— 2 chirps
All remote control codes
have been erased; program
in new remote control(s)
Set channel
6 timer
✱
30sec.
25
When the desired interval has
passed, turn off the ignition key
1 chirp
Timer has been set to the
interval of your choice
between 1sec. and 2min.
✱WARNING
: If the built-in timer controls window/sunroof closure on your vehicle,
DO NOT change the timer setting! This requires installer-only programming.
Changing the value will adversely effect operation and may cause damage.
16