Filter
Top Products
6
© 2004 directed electronics, inc.
valet
®
mode
You can prevent your system from arming, by using Valet
®
Mode. This
is very useful when washing the vehicle or having it serviced. In Valet
®
Mode, the system will not arm, even with the transmitter, but all con-
venience functions (door locks, trunk release, etc.) will work normally.
To enter or exit Valet
®
Mode with the integrated LED/Valet
®
switch:
Turn ignition to “on” position, then
turn to “off” position. Press
and release the integrated
LED/Valet
®
switch within 10
seconds. The status LED will
light steady if you have entered Valet
®
Mode. To exit Valet
®
Mode,
repeat the steps above. The LED will turn off when exiting Valet
®
Mode.
remote valet
®
Remote Valet
®
is a convenient feature that makes bypassing the securi-
ty system easier. This feature makes it possible to exit or enter Valet
®
Mode using your factory keyless transmitter.
1. Open any door.
2. Press LOCK on the transmitter.
3. Press UNLOCK on the transmitter.
4. Press LOCK on the transmitter.
The status LED will stay on if you have entered Valet
®
Mode, and it will
go out if you exited Valet
®
Mode.
DRW-35