Clifford 20.7 Automobile Electronics User Manual


 
33
© 2008 Directed Electronics. All rights reserved.
Low Runtime Alerts
The remote reports with one short beep followed by 1 short error tone
REPEATEDTWICEANDTHETEXTAREADISPLAYSRUNTIMEWHENTHEREMOTESTART
runtime is at the 3-minutes remaining. The remote beeps one more time
when 1 minute is remaining. You have the option to let the remote start time
OUTORUSETHEhRUNTIMERESETvFEATURE7HENPROGRAMMEDh/FFvYOUWILL
not receive a low runtime alert on the remote.
#AR/NOR/FF(OMEs
Turns Off or On, the 2 car operation from the remote. The "Home" option
is not available.
"ACKLIGHT#OLOR/FFs
Turn Off the LCD backlighting or change the color of the backlighting.
Color options include: Blue, green, red, aqua, purple, lime, clear
Temperature Units F and Cs
Display temperature in Fahrenheit or Celsius
Button Press Beep On or Offs
Turn Off beeps when a button on the remote is pressed
System Type Remote Start & Security or Remote Starts
Select the type of system you are using, security system with remote start
or a keyless entry system with remote start (to ensure that the correct icons
are displayed on the LCD)
Clock Set s
To enter clock set mode, Press the
BUTTON4HE,#TEXTDISPLAYREADS
"hour" to confirm entry in the clock set menu.
Press the
AUX
button to move up the menu, press the button to move
down the menu.
!FTERYOUSELECTTHETIMEINCREMENTHOURMINPRESS . The hour or minute
flashes. Press the
AUX
button to move up to the hour or minute, and press
the button to move down to the hour or minute you want to set.
Once the desired time has been reached you can either choose "back" in
the menu or press or TOSAVEANDEXIT