Filter
Top Products
58 VRX938R
English
Installation and Wire
connection manual
3. GENERAL CAUTIONS
4. CAUTIONS ON INSTALLATION
1. Do not open the case. There are no user ser-
viceable parts inside. If you drop anything into
the unit during installation, consult your dealer
or an authorized CLARION service centre.
2. Use a soft, dry cloth to clean the case. Never
use a rough cloth, thinner, benzine, or alcohol,
etc. For tough dirt, apply a little cold or warm
water to a soft cloth and wipe off the dirt gen-
tly.
1. Prepare all articles necessary for installing the
main unit before starting.
2. This model is used with the LCD panel slid for-
wards (shell loading system). On some types
of cars, the LCD panel may touch the dash-
board or shift lever, in which case it cannot be
installed. Check that the set will not hamper
operation of the shift lever before choosing the
place of installation.(Figure 2)
5. Use the enclosed screws for installation. Us-
ing other screws can cause damage. (Figure
4)
3. Install the unit within 30° of the horizontal plane.
(Figure 3)
4. If you have to do any work on the car body,
such as drilling holes, consult your car dealer
beforehand.
6. The source unit has mounting screw holes for
NISSAN (N marks) and TOYOTA (T marks)
vehicles.
Dashboard
Shift lever
Shift lever
(check that it does not
touch the LCD.)
Figure 2
Max. 30˚
Figure 3
Chassis Chassis
Damage
Max. 8 mm
Figure 4
Figure 5
T
NNT
NT