Filter
Top Products
VRX630 49
English
Installation and Wire
connection manual
■ Connecting the Accessories
•
Connection to the external amplifier
The external amplifier can be connected to the AUDIO 4CH. OUTPUT terminal (RCA pin jack) on
the main unit. In other words, it can be connected provided the DSP is connected.
•
Connection to the CCD camera for vehicle
The CCD CAMERA for vehicle can be connected to the system expansion terminal on the main
unit. For detailed information, refer to the instruction sheet or manual for the CCD CAMERA.
Notes:
• A power supply box (sold separately) is required for connection of the main unit and the CCD CAMERA.
• While the CCD CAMERA is used, the navigation cannot be turned on.
• The power supply box for camera CCA-147 can not be used. Please use The CCA-188 instead.
•
If the specified lead of the cellular phone is connected to the phone mute
lead of the source unit, the audio mute is available when the cellular tele-
phone is used.
For audio mute setting in cellular telephone use, see page 32.
•
TV Tunner
When the TV TUNER is to be connected, connect the Ce NET connector and RCA PIN (yellow). For
detailed information, refer to the instruction manual of the TV TUNER.
■ Connecting the parking brake lead
Connect the lead to parking brake lamp earth
in the meter panel.
Notes:
• Connecting the parking brake lead to lamp earth
allows you to watch TV/VTR/DVD changer when
the parking brake is engaged.
• When the parking brake lead is not connected,
the monitor will stay off.
Parking brake
Parking brake lamp
+ lead to battery
Connect these three leads.
- cord
parking
brake signal
lead
Parking brake lead
(bright green)