Filter
Top Products
Using Cruise Control on Hills
How well the cruise control will work on hills depends
upon the vehicle speed, load, and the steepness of the
hills. When going up steep hills, you might have to step
on the accelerator pedal to maintain the vehicle speed.
When going downhill, you might have to brake or shift
to a lower gear to keep the vehicle speed down. When
the brakes are applied the cruise control is disengaged.
Ending Cruise Control
There are three ways to end cruise control:
.
To disengage cruise control; step lightly on the
brake pedal.
.
Press [ on the steering wheel.
.
To turn off the cruise control, press I on the
steering wheel.
Erasing Speed Memory
The cruise control set speed is erased from memory by
pressing the
I button or if the ignition is turned off.
Exterior Lamps
The exterior lamps control
is located on the
instrument panel to the
left of the steering wheel.
It controls the following systems:
.
Headlamps
.
Taillamps
.
Parking Lamps
.
License Plate Lamps
.
Instrument Panel Lights
The exterior lamps control has four positions:
O (Off): Turns off the automatic headlamps and
daytime running lamps (DRL). Turn the headlamp
control to the off position again to turn the automatic
headlamps or DRL back on.
For vehicles first sold in Canada, the off position will
only work when the vehicle is shifted into P (Park).
4-10