Filter
Top Products
Setting the Clock
Without Date Display
AM/FM Base Radio with a Single CD
Player
This radio has a H button for setting the time.
To set the time:
1. Press the
H button until the hour begins flashing
on display. Press
H a second time and the
minutes begin flashing on display.
2. To increase or decrease the time, do one of the
following while the hours or minutes are flashing:
• Turn the f knob.
• Press ¨SEEK or ©SEEK.
• Press \ FWD or s REV.
3. Press the
H button again until the clock display
stops flashing to set the currently displayed time,
or wait five seconds until the flashing stops and the
current time displayed is automatically set.
To change the time default setting from 12 hour to
24 hour, press the
H button until 12H or 24H is displayed.
Once 12H or 24H is displayed, turn the
f knob to the
desired option to select the setting. Press the
H button
again to apply the setting, or let the screen time out.
With Date Display
Single CD (MP3) Player
This radio has a H button for setting the time.
To set the time and date:
1. Turn the radio on.
2. Press the
H button and the HR, MIN, MM, DD,
YYYY (hour, minute, month, day, and year) displays.
3. Press the pushbutton located under any one of the
tabs to be changed.
4. To increase the time or date, do one of the
following:
• Press the pushbutton below the selected tab.
• Turn the f knob clockwise.
• Press ¨SEEK.
• Press \ FWD.
5. To decrease the time or date, do one of the
following:
• Turn the f knob counter-clockwise.
• Press ©SEEK.
• Press s REV.
The date does not automatically display. To see the
date press the
H button while the radio is on. The date
with display times out after a few seconds and goes
back to the normal radio and time display.
3-64