Filter
Top Products
Tire Terminology and Definitions
Air Pressure: The amount of air inside the
tire pressing outward on each square inch of
the tire. Air pressure is expressed in pounds
per square inch (psi) or kilopascal (kPa).
Accessory Weight
: This means the combined
weight of optional accessories. Some examples of
optional accessories are, automatic transmission,
power steering, power brakes, power windows,
power seats, and air conditioning.
Aspect Ratio
: The relationship of a tire’s height
to its width.
Belt
: A rubber coated layer of cords that is
located between the plies and the tread. Cords
may be made from steel or other reinforcing
materials.
Bead
: The tire bead contains steel wires wrapped
by steel cords that hold the tire onto the rim.
Bias Ply Tire
: A pneumatic tire in which the plies
are laid at alternate angles less than 90 degrees
to the centerline of the tread.
Cold Tire Pressure
: The amount of air pressure
in a tire, measured in pounds per square inch (psi)
or kilopascals (kPa) before a tire has built up heat
from driving. See Inflation - Tire Pressure on
page 5-60.
Curb Weight
: The weight of a motor vehicle
with standard and optional equipment including
the maximum capacity of fuel, oil, and coolant,
but without passengers and cargo.
DOT Markings
: A code molded into the sidewall
of a tire signifying that the tire is in compliance
with the U.S. Department of Transportation (DOT)
motor vehicle safety standards. The DOT code
includes the Tire Identification Number (TIN), an
alphanumeric designator which can also identify
the tire manufacturer, production plant, brand,
and date of production.
GVWR
: Gross Vehicle Weight Rating.
See Loading the Vehicle on page 4-33.
GAWR FRT
: Gross Axle Weight Rating for the
front axle. See Loading the Vehicle on page 4-33.
GAWR RR
: Gross Axle Weight Rating for the
rear axle. See Loading the Vehicle on page 4-33.
5-57