Filter
Top Products
2. The driver side cargo cover panel latch must lock in
place before the passenger side latch can be locked.
If this procedure is not followed exactly, the cargo
cover panels might not correctly lock in place. Push
the driver side latch toward the front of the vehicle to
lock the cover in position. A click sounds when each
latch locks. Lock the remaining passenger side latch
on panel 1.
3. Install cargo cover 2 followed by 3 next. Place the
latches in the unlocked position. Place the cargo
cover panel on the cargo area rails while holding the
back of the cargo panel up.
Push the panel forward until it is snug against the
other panel and then let the back of the panel down
making sure that the pegs (A) align with the
receivers (B).
4. Push the latches toward the front of the vehicle,
starting with the driver side latch, to lock the
panel in place. A click sounds when each latch
locks correctly.
Driver Side Shown, Passenger Side Similar
2-85