Filter
Top Products
6-24
Then, without shutting off the engine, follow
these steps:
3400 (Code E)
V6 Engine
3800 (Code K)
V6 Engine
The transaxle fluid dipstick handle is the red
loop near the back of the engine. See “Engine
Compartment Overview” in the Index for more
information on location.
1. Pull out the dipstick and wipe it with a clean rag or
paper towel.
2. Push it back in all the way, wait three seconds and
then pull it back out again.
3400 (Code E)
V6 Engine
3800 (Code K)
V6 Engine
3. Check both sides of the dipstick, and read the
lower level. The fluid level must be in the
cross
-hatched area.
4. If the fluid level is in the acceptable range, push the
dipstick back in all the way.