18
950H Wheel Loader specifications
Transmission
Forward 1 6.9 km/h 4.3 mph
Forward 2 12.7 km/h 7.9 mph
Forward 3 22.3 km/h 13.9 mph
Forward 4 37 km/h 23.0 mph
Reverse 1 7.6 km/h 4.7 mph
Reverse 2 13.9 km/h 8.6 mph
Reverse 3 24.5 km/h 15.2 mph
Reverse 4 40 km/h 24.9 mph
• Maximum travel speeds (23.5-25 tires).
Hydraulic System
Bucket/Work Tool System - Pump 270 L/min 71 gal/min
Output
Steering System Pump Type Piston
Hydraulic Cycle Time - Raise 6.2 Seconds
Hydraulic Cycle Time - Dump 1.3 Seconds
Hydraulic Cycle Time - Lower, 2.5 Seconds
Empty, Float Down
Hydraulic Cycle Time - Total 10 Seconds
• Implement System (Standard), Piston Pump - Rated at 2,100
rpm and 1,000 psi (6900 kPa).
• Cycle time with rated payload
Brakes
Brakes Meets required
standards.
• Meet OSHA, SAE J1473 OCT90 and ISO 3450-1985 standards.
Axles
Front Fixed front
Rear Oscillating +/- 13°
Maximum Single-Wheel Rise and 470 mm 18.5 in
Fall
Engine
Engine Model Cat
®
C7 ACERT™
Gross Power - SAE J1995 162 kW 217 hp
Net Power - ISO 9249 147 kW 197 hp
Net Power - SAE J1349 145 kW 195 hp
Net Power - 80/1269/EEC 147 kW 197 hp
Peak Torque (Net) @ 1,400 RPM 907 N·m 669 ft-lb
Bore 110 mm 4.33 in
Stroke 127 mm 5 in
Displacement 7.2 L 439 in
3
• Caterpillar engine with ACERT™ Technology - EPA Tier III,
EU Stage III Compliant
• These ratings apply at 1,800 rpm when tested under the
specified standard conditions.
• Rating for net power advertised based on power available
when the engine is equipped with alternator, air cleaner,
muffler and on-demand hydraulic fan drive at maximum fan
speed.
Weights
Operating Weight 18 338 kg 40,435 lb
• For 3.1 m
3
(4.0 yd
3
) general purpose bucket with BOCE
Buckets
Bucket Capacities 2.5-3.5 m
3
3.25-4.5
yd
3
Max Bucket Capacity 3.5 m
3
4.5 yd
3
Operating Specifications
Breakout Force 165 kN 37,125 lb
Static Tipping Load, Full Turn 10 915 kg 24,068 lb
- Bucket
Static Tipping Load, Full Turn 4273 kg 9,421 lb
- Forks
• For 3.1 m
3
(4.0 yd
3
) general purpose bucket with BOCE
• For 1829 mm (72 in) quick coupler pallet forks
